Samsys Filter-pots MCF20

Our Profluid oil separators clean the cooling water of your metal processing machine in approximately 2 hours. These oil separators are very easy to operate and maintain.

The oil separators are a porous filter to separate the oil from the cooling water. The porous filter has a highly effective separating capacity without quickly getting blocked up. The difference in viscosity causes the oil to rise to the surface so that it can easily be separated and disposed of. 

Benefits of using oil filters

• Separate oil from cooling water in approximately 2 hours
• No more foul-smelling cooling water
• Prevents (and aids recovery from) coolant-related health problems
• Prevents work piece corrosion
• Less wear in machine components

Lathes, milling machines and / or grinders with a working pressure up to 20 bar must be protected against abrasive particles such as chips and other contaminants. Especially for this application up to 20 bar, Dormatec has a Profluid bag filter in its program that can easily be built on existing machines and pumps.

The Profluid bag filters are equipped with an integrated delta-P meter that gives a signal when the filter bag is contaminated. The filter finities are available in 5, 10, 25 and 50 micron. If you use a duplex setup, you can make the filter bag change without having to switch off the machine.

Model - MCF-20
Capacity - 100 l / min
Maximum pressure - 20 bar
Dimensions - 300x270x670
Weight - 38 kg
Color - Dark gray